NO DEFLECTION

Make the following tests to determine location of open, short, or abnormality high resistance in circuit.

CIRCUIT RESISTANCE TEST
(Using Voltmeter)

1. Connect voltmeter between ignition coil positive (+) terminal and a good ground location.
2. Turn ignition switch to "ON" position and observe voltmeter reading.

Choose one of the following:

• 0 VOLTS

• 0-2.5 VOLTS

• 2.5-4.5 VOLTS

• 7-11 VOLTS

• BATTERY VOLTAGE (11-12 VOLTS)

• go back to previous page